Floating Boat Dock with Certification, Dock Floater

Product Description

 New design dock,




Floating Pontoon:

Specification	50*50*40cm
Material	High density polyethylene (HMWHDPE),which inported from ShangHai SECCO, is a good quality, environmental protection, low temperature resistance, good durability.Raw materials for one-time blow molding.
Surface	The floating dock has a flat appearance,no burrs and flashes, no effect on the use of cracks and deformation.The color of floating dock can be customized according to requirments of the user. There is no obvious color diference on a single dock. The color of the same batch of products is basically the same
Thickness	The thinnest part is 5mm, Four ears(corners) are the thickest. The ears(corners) are solid.
HygienicIndex	Normal color and lustre,no odor,no smell,no evaporation residue and decolorization test all meet the national standard.
Capability	-60 to 80 degrees Celsius can work normally, the service life reaches 15 years, corrosion resistance, oxidation resistance, free from seawater, drugs, no pollution, no damage to the environment, and will not affect the fish ponds.
BearingCapacity	Max 300KG per square meter Degree of depth:30cm
Additive	Anti - aging , corrosion - resistant , anti - static , anti - ultraviolet
Subjected to wave forces	The safe use of water surface is within the sixth grade of wind wave.In calss7-8 of wind wave should limit the scope of use.In calss8-10 should be strengthened.
Dead weight	350KG
Wallop	300J
Diagonal tension	The single dock can bear more than 2500kg of tensile force without deformation and fracture

 

1.Unlimited Number of Construction

The pontoons of the construction can adapt to any specific lakeside residen's needs and can be assembled to correnspond with the shape or size you have in mind. The possible number of construction is unlimited.

2.Fast and Easy to Assemble
Only 2 people are needed to put together 50 cubes in a one hour period.The pontoon construction is very simple, blocks held together tightly and filmly with special connecting pins. All parts are light weight and easy to handle.
 

Dimension of single floats: 500mm×500mm×400mm(L*W*H) 

Color available :blue ,gray , orange , yellow

Grey Color:


Blue Jetty Dock:



Orange with Ladder:



Customize Colors:



Factory:
 

Weight: 7.0Kgs/ pc ± 0.3Kgs/ pc
Floating Capacity: 350Kgs/ M2
Raw Material: HDPE
Preference Temperature: -60°C/+80°C Color available: orange, blue, gray, black

Load Capacity:

each one square meter is made up of four pontoons, top load is 350kgs.
Draft without load: 2.5-3cm;
Draft with load of 150kgs: 15-20cm(safe);
Draft with load of 300kgs:35-40cm(load limit)

Anti Wind Wave:

1.The wave on water surface between 2-class and 3-class belongs to safe applicable range.
2.The wave on water surface between 3-class and 6-class can be applicable; however,the safety protection must be reinforced.
3.The wave on water surface between 6-class and 9-class is the restricted applicable range (it is suggested that the shipping shall not be parked and the visitors shall not be in or out). 
Attention: to avoid shaking of the dock, the area of internal lake's dock is not less than 30 square meter; the area of stage is not less than 100 square meter.

Anchoring:

1.If water is less than 3m in depth, steel piles are to be put in proper place and then connected by wheels, which can prevent the floating dock from moving laterally but can automatically rise and fall in line with water level.
2.If water is over 3m in depth, anchoring can be used by sinking the anchorage block pulled by steel cables to the water bottom.

Guarantee:

warranty on our floats are 3 years, that is within three years, if there is any damage caused by the product in normal condition, we will replace the floats for you.